Easy-To-Follow Steps to Maintain Epoxy Factory Floors

In terms of flooring, the first preference of property owners is a floor that is easy to clean and is non-porous. This is where epoxy factory floors become very useful as they are completely non-porous and easy to clean. Some standard features in these floors make them a seamless choice for people searching for a floor for their factories or manufacturing units. For example, no stripping or waxing is required, and inspection and regular upkeep can maintain the floor for years. Some straightforward and typical steps are taken regarding epoxy factory floor maintenance, and we have discussed this in this post.

Epoxy factory floors are crafted - Cobblecrete

REMOVING DIRT AND GRIME

Debris on the surface must be removed immediately, and not doing so can cause significant damage to the floor or epoxy coating. The dust will start acting as an abrasive to scrub the surface and remove the finish or the polish. To maintain your epoxy factory floors, you must ensure that dirt and grime are removed regularly.

USING CLEANING AGENTS FOR BETTER LOOKS

Experts of epoxy coating services recommend avoiding soap on epoxy factory floors or epoxy coating, as it will create a layer that will be difficult to remove even after thorough rinsing. This layer can be a matter of concern in two ways: it will make the floor slippery and attract dirt and debris more than usual. Experts recommend avoiding floor stripping agents like citrus-based cleaners and corrosive chemical degreasers. They also have the strength to damage epoxy coating if applied regularly. For epoxy factory floors cleaning, you can use a neutral pH cleaning agent by diluting it in water. You can use the following cleaning process using this solution.

Strength to damage epoxy coating if applied regularly - Cobblecrete

STEP 1

• Swipe the entire floor using a drive mop or a broom to remove loose debris and dirt.
• This will remove away the substances that can be abrasive and degrade the epoxy factory floors.

STEP 2

• Blue scrubbing pads are recommended for commercial floor scrubbing.
• Avoid using aggressive cleaning pads, and the cleaning agent should also be diluted as per the manufacturer's recommendations.

STEP 3

• Areas that are dirtier should be cleaned twice and you can apply the diluted mixture and clean the area with a blue pad.
• Now, you can rinse the floor with clean water and use a wet vacuum to remove excessive water.
• One more rinsing is required on epoxy factory floors to ensure that there is no residue left behind.
• This is an important part of removing the residue and the cleaning solution means ensuring longer life of the epoxy coating.

Cleaning solution means ensuring longer life - Cobblecrete

STEP 4

• It's time now to dry the floor before opening it for use one more time.
• Avoid using solid solvents, particularly, those with hydrocarbons.
• The pressure should not exceed 800 PSI if you are using a high-pressure water blaster to clean epoxy factory floors.
• The water temperature should not be above 120 degrees Fahrenheit.